From:	Jeff Clark
Sent:	Monday, August 29, 2005 11:14 AM
To:	'Fetterman, Pat'; Bill Buscher (E-mail); Bill Larch (E-mail); Campbell, Bob; Cathy Devlin; charlie.passut@aftonchemical.com; Dan Pridemore; Dick Patrick (E-mail); greg.shank@volvo.com; James Gutzwiller; James Matasic (E-mail); Jim McGeehan; Jim Moritz (E-mail); Jim Rutherford; Jim Wells (E-mail); Joe Franklin; John Heagelin; Keith Selby; kenneth.goshorn@volvo.com; Mark Cooper; Matt Urbanak (E-mail); Michael Minotti; Mike Zaiontz (E-mail); Norbert Nann (E-mail); Riccardo Conti; Ron Buck; Scott Harold; Scott Richards (E-mail); Steve Kennedy; Tom Franklin; Warren Totten (E-mail); Wim Van Dam
Subject:	Mack SP Minutes of August 3 2005
Attendance - Jeff Clark, Jim Matasic, Bob Campbell, Scott Richards, Jim Moritz, John Haegelin, Ron Buck, Greg Shank, Joe Franklin

The purpose of this conference call was to decide what set of parts to move forward with for the T-11 test. After a short discussion, it was moved (Shank, Richards second) that all future T-11 tests use the T-12 top ring. The motion passed unanimously. It was noted that there was a possibility of having up to 8 data points in total by the end of the month and that we could re-evaluate the data if necessary at the Richmond meetings in September.

Next meeting - September in Richmond. 

Regards,

Jeff Clark
Staff Engineer
ASTM Test Monitoring Center
6555 Penn Avenue
Pittsburgh, PA 15206
412-365-1032
412-848-8843 (cell)
jac@astmtmc.cmu.edu