From:	Jeff Clark
Sent:	Tuesday, April 19, 2005 2:59 PM
To:	Andrew Ritchie (E-mail); Andy Broff (E-mail); Bill Larch (E-mail); Bob Campbell (E-mail); Brad Carter (E-mail); Cathy Devlin (E-mail); Greg Shank (E-mail); Jeff Clark (E-mail); Jim Gutzwiller (E-mail); Jim Matasic (E-mail); Jim Moritz (E-mail); Jim Rutherford (E-mail); Jim Wells (E-mail); John Haegelin (E-mail); Jose Gutierrez (E-mail); Keith Selby (E-mail); Ken Goshorn (E-mail); Mark Cooper (E-mail); Michael Minotti (E-mail); Pat Fetterman (E-mail); Riccardo Conti (E-mail); Ron Buck (E-mail); Scott Richards (E-mail); Steve Kennedy (E-mail); Tom Franklin (E-mail); Wim Van Dam (E-mail)
Subject:	T-12 Minutes of April 19 2005
Attendance - Jim Matasic, Scott Richards, Bob Campbell, Jim Gutzwiller, Greg Shank, Jim Moritz, John Haegelin, Riccardo Conti, Jim Rutherford, Jeff Clark, Mark Cooper, Ron Buck, Tom Franklin

Minutes of April 15 - approved

Matrix Hardware - Jim Rutherford indicated that the matrix design can accommodate the first set of tests being run on the currently available hardware. The order of some of the matrix runs has been adjusted accordingly and the TMC has the updated run order. Jim was questioned how much the matrix could be weakened and he indicated that it depends on if the hardware 'batches' are different and by how much. Greg moved and Riccardo Conti seconded that the first set of matrix runs be run on the currently available hardware. The second runs will be on the 'new batch' of hardware. After extensive discussion, the motion passed 7-0-3.

Next Meeting - teleconference will be held on 4/26 at 1 pm edt; primarily to discuss reference period length and new stand requirements.

Regards,

Jeff Clark
Staff Engineer
ASTM Test Monitoring Center
6555 Penn Avenue
Pittsburgh, PA 15206
412-365-1032
412-848-8843 (cell)
jac@astmtmc.cmu.edu